Prodotti GR5 ipprovduti minn GNEE
Pjanċa tal-Liga tat-Titanju GR5
Skeda Ċart ta 'Ti Alloy Grad 5 Pipe
|
1/8" IPS(.405"OD) |
3 1/2" IPS( 4.000" OD) |
|---|---|
|
SCH 40, 80 |
SCH 10, 40, 80, 160, XXH |
|
1/4" IPS(.540"OD) |
4" IPS (4.500" OD) |
|
SCH 10, 40, 80 |
SCH 10, 40, 80, 160, XXH |
|
3/8" IPS(.675"OD) |
5" IPS (5.563" OD) |
|
SCH 10, 40, 80 |
SCH 10, 40, 80, 160, XXH |
|
1/2" IPS(.840"OD) |
6" IPS (6.625" OD) |
|
SCH 5, 10, 40, 80, 160, XXH |
SCH 5, 10, 40, 80, 120, 160, XXH |
|
3/4" IPS (1.050" OD) |
8 " IPS (8.625 "OD) |
|
SCH 10, 40, 80, 160, XXH |
SCH 5, 10, 40, 80, 120, 160, XXH |
|
1" IPS:(1.315′OD) |
10" IPS (10.750" OD) |
|
SCH 5, 10, 40, 80, 160, XXH |
SCH 10, 20, 40, 80 (.500), VERU 80 (.500) |
|
1-1/4" IPS(1.660"OD) |
12" IPS (12.750" OD) |
|
SCH 10, 40, 80, 160, XXH |
SCH 10, 20, 40(.375), VERU40(.406), SCH80(.500) |
|
1-1/2" IPS(1.900"OD) |
14" IPS (14.000" OD) |
|
SCH 10, 40, 80, 160, XXH |
SCH10 (.188), SCH40 (.375) |
|
2" IPS (2.375" OD) |
16" IPS (16.000" OD) |
|
SCH 10, 40, 80, 160, XXH |
SCH10(.188), SCH40(.375) |
|
2 1/2" IPS(2.875"OD) |
18" IPS (18.000" OD) |
|
SCH 10, 40, 80, 160, XXH |
SCH-40 (.375) |
|
3" IPS (3.500" OD) |
|
|
SCH 5, 10, 40, 80, 160, XXH |
Kompożizzjoni Kimika tal-pajp tat-titanju ta 'Grad 5
| Titanju Gr 5 | C | Ti | N | Fe | H | O | V | Al |
| 0.10 max | 90 min | 0.05 max | 0.40 max | 0.015 max | 0.20 max | 3.5-4.5 | 5.5-6.75 max |
Proprjetajiet mekkaniċi tal-pajp UNS R56400
| Densità | Punt tat-tidwib | Qawwa tar-Rendiment (0.2% Offset) | Qawwa tat-tensjoni | Titwil |
| 4.43 g/ċm3 | 1632 grad (2970 grad F) | Psi – 128000, MPa – 880 | Psi – 138000, MPa – 950 | 14 % |
Titanju Grad 5 Grad Ekwivalenti tal-Pipe
| STANDARD | UNS | WERKSTOFF NR. |
| Titanju Gr 5 | R56400 | 3.7165 |
Dijametru barra ta 'Ti Alloy Grad 5 Pajp iwweldjat
| Tipi | Dijametru barra | Ħxuna tal-ħajt | Tul |
|---|---|---|---|
| NB Daqsijiet (fl-istokk) | 1/8" ~ 8" | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Sa 6 Metri |
| Pajp tat-Titanju Seamless Grad 5 (Daqsijiet Personalizzati) | 5.0mm ~ 203.2mm | Skond ir-rekwiżit | Sa 6 Metri |
| Pajp iwweldjat tat-titanju ta' Grad 5 (fl-istokk + Daqsijiet Custom) | 5.0mm ~ 1219.2mm | 1.0 ~ 15.0 mm | Sa 6 Metri |
Uns R56400 Erw Pipe Stock Lista
| Standard | Daqs tal-pajp | O.D. | I.D. | Ħxuna tal-ħajt |
|---|---|---|---|---|
| Skeda 5 | 0.75 pulzieri19.05 mm | 1.05 pulzieri26.67 mm | 0.920 pulzieri23.368 mm | 0.065 pulzieri1.6510 mm |
| Skeda 5 | 1 pulzier25.4 mm | 1.315 pulzier33.401 mm | 1.185 pulzier30.099 mm | 0.065 pulzieri1.6510 mm |
| Skeda 5 | 1.25 pulzier31.75 mm | 1.66 pulzieri42.164 mm | 1.530 pulzier38.862 mm | 0.065 pulzieri1.6510 mm |
| Skeda 5 | 1.5 pulzieri38.1 mm | 1.9 pulzieri48.26 mm | 1.770 pulzier44.958 mm | 0.065 pulzieri1.6510 mm |
| Skeda 5 | 2 pulzieri50.8 mm | 2.375 pulzieri60.325 mm | 2.245 pulzier57.023 mm | 0.065 pulzieri1.6510 mm |
| Skeda 5 | 2.5 pulzieri63.5 mm | 2.875 pulzier73.025 mm | 2.709 pulzieri68.8086 mm | 0.083 pulzieri2.1082 mm |
| Skeda 5 | 3 pulzieri76.2 mm | 3 1/2 pulzieri88.90 mm | 3.334 pulzier84.6836 mm | 0.083 pulzieri2.1082 mm |
| Skeda 5 | 3.5 pulzieri88.9 mm | 4 pulzieri101.6 mm | 3.834 pulzier97.3836 mm | 0.083 pulzieri2.1082 mm |
| Skeda 5 | 4 pulzieri101.6 mm | 4.500 pulzier114.3 mm | 4.334 pulzier110.0836 mm | 0.083 pulzieri2.1082 mm |
| Skeda 5 | 6 pulzieri152.4 mm | 6.625 pulzieri168.275 mm | 6.407 pulzieri162.7378 mm | 0.109 pulzieri2.7686 mm |
| Skeda 5 | 8.00 pulzieri203.2 mm | 8.625 pulzieri219.075 mm | 8.407 pulzieri213.5378 mm | 0.109 pulzieri2.7686 mm |
| Skeda 5 | 10.00 pulzieri254 mm | 10.75 pulzieri273.05 mm | 10.482 pulzieri266.2428 mm | 0.134 pulzier3.4036 mm |
| Skeda 5 | 12.00 pulzieri304.8 mm | 12.75 pulzieri323.85 mm | 12.420 pulzier315.468 mm | 0.165 pulzieri4.191 mm |
| Skeda 10 | 0.75 pulzieri19.05 mm | 1.05 pulzieri26.67 mm | 0.884 pulzieri22.4536 mm | 0.083 pulzieri2.1082 mm |
| Skeda 10 | 1 pulzier25.4 mm | 1.315 pulzier33.401 mm | 1.097 pulzier27.8638 mm | 0.109 pulzieri2.7686 mm |
| Skeda 10 | 1.25 pulzier31.75 mm | 1.66 pulzieri42.164 mm | 1.530 pulzier38.862 mm | 0.109 pulzieri2.7686 mm |
| Skeda 10 | 1.5 pulzieri38.1 mm | 1.9 pulzieri48.26 mm | 1.770 pulzier44.958 mm | 0.109 pulzieri2.7686 mm |
| Skeda 10 | 2 pulzieri50.8 mm | 2.375 pulzieri60.325 mm | 2.157 pulzier54.7878 mm | 0.109 pulzieri2.7686 mm |
| Skeda 10 | 2.5 pulzieri63.5 mm | 2.875 pulzier73.025 mm | 2.635 pulzieri66.929 mm | 0.12 pulzieri3.0480 mm |
| Skeda 10 | 3 pulzieri76.2 mm | 3 1/2 pulzieri88.90 mm | 3.260 pulzier82.804 mm | 0.12 pulzieri3.0480 mm |
| Skeda 10 | 3.5 pulzieri88.9 mm | 4 pulzieri101.6 mm | 3.760 pulzier95.504 mm | 0.12 pulzieri3.0480 mm |
| Skeda 10 | 4 pulzieri101.6 mm | 4.500 pulzier114.3 mm | 4.260 pulzier108.204 mm | 0.12 pulzieri3.0480 mm |
| Skeda 10 | 6 pulzieri152.4 mm | 6.625 pulzieri168.275 mm | 6.357 pulzieri161.4678 mm | 0.134 pulzier3.4036 mm |
| Skeda 10 | 8.00 pulzieri203.2 mm | 8.625 pulzieri219.075 mm | 8.329 pulzieri211.5566 mm | 0.148 pulzier3.7592 mm |
| Skeda 10 | 10.00 pulzieri254 mm | 10.75 pulzieri273.05 mm | 10.420 pulzieri264.668 mm | 0.160 pulzieri4.064 mm |
Finish tal-wiċċ ta 'Ti Alloy Grad 5 pajp iwweldjat
| Finish tal-wiċċ | Wiċċ Intern (ID) | Wiċċ Esterbal (OD) | |||
| Medja tal-ħruxija (RA) | Medja tal-ħruxija (RA) | ||||
| μ pulzier | μm | μ pulzier | μm | ||
| AP | Ittemprat & Imnaddfin | Mhux definit | Mhux definit | 40 jew Mhux definit | 1.0 jew Mhux definit |
| BA | Beight Ittemprat | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
| MP | Pollakk mekkaniku | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
| EP | Elettro Pollakk | 15,10,7,5 | 0.38,0.25,0.20;0.13 | 32 | 0.8 |
Karatteristiċi tal-Pajp tat-Titanju Grad 5
Fabbrikabbiltà tajba
Duttilità tajba
Titanju ta 'Qawwa Għolja
Weldability Tajba
Saħħan Ittrattat
Applikazzjoni ta 'DIN 3.7165 Hollow Pipe
Irkupraturi tar-Raffinar tal-Pitrolju -, sistemi ta' rkupru katalitiku
Linja tal-pajpijiet għall-Gass u l-Ilma
Petrokimiċi u Raffineriji
Pajpijiet għal skopijiet ta' Inġinerija
Tagħmir tal-Mitħna tal-Karta
Esplorazzjoni taż-Żejt u tal-Gass
Impjanti Termali, Nukleari u Solari
Ġenerazzjoni tal-Enerġija - hangers tat-tubi, burners tal-faħam pulverizzat
Prodotti tat-titanju pprovduti minn GNEE
|
Grad |
TA1 TA2 TC4 TA9-1 TA18 Gr1 Gr2 GR5 Gr7 GR 9 Gr11 Gr12 |
|
daqs |
OD. 6mm~13mm Tul Max 4m OD.13mm ~ 114.3mm, Tul Max 15m WT.0.3mm ~ 12mm |
|
Standard |
GB/T3624 GB/T3625 ASTM B337 B338 B861 B862 ASME SB338 ASME SB337 ASME SB861 SB862 |
|
Dimensjoni (MM) |
Firxa Daqs: Φ10-Φ168 x0.5-10x 100-18000 MM Φ 5/8"xBWG20*L |
|
Applikazzjoni |
skambjatur tas-sħana u Kondensatur; pajp tal-koljaturi tat-Tip U; Pipeline tal-pitrolju; Biedja tal-baħar; Evaporatur; Pajping tat-Trasport tal-Fluwidu eċċ. |
|
Tagħmir ta' Spezzjoni |
100% Tester mhux distruttiv; Detector tal-Ittestjar tal-UT; Tester tat-tensjoni Ditekter ultrasoniku diġitali; Tester infra-aħmar; Tester tal-Ebusija HV |
|
Isem tal-prodott |
Bar tat-titanju pur/virga tat-titanju pur/bar tal-liga tat-titanju/virga tal-liga tat-titanju |
|
Standard |
ASTM B348/ASTM F136/ASTM F67/AMS 4928/AMS 4965L |
|
Grad |
GR1,GR2,GR3,GR4,GR5,GR7,GR9,GR11,GR12,GR23 |
|
Dijametru |
6-500mm, personalizzabbli |
|
Tul |
Max6000mm |
|
Stat tal-provvista |
Stat tax-xogħol sħun, Stat tax-xogħol kiesaħ, Stat ittemprat, Stat tas-soluzzjoni solida |
|
Wiċċ |
Wiċċ aċiduż jew illustrar, wiċċ blasted ramel |
|
Forma |
Tond, ċatt, kwadru, eżagonali |
|
Applikazzjoni |
Metallurġija, elettronika, medika, kimika, pitrolju, farmaċewtika, aerospazjali, eċċ. |
pjanċa/folja/strixxa tat-titanju
|
Oġġett |
Pjanċa tat-titanju, Folja tat-titanju |
|
Grad |
GR1,GR2,GR3,GR4,GR5,GR7,GR9,GR11,GR12,GR23, eċċ. |
|
Daqs |
0.3-80mm Inqas minn jew ugwali għal 300-1500mm Inqas minn jew ugwali għal 12000mm jew customizable |
|
Standard |
ASTM B265,ASTM F136,AMS 4900,AMS 4901,AMS 4911,AMS 4919, AMS 4914 |
|
MOQ |
10kg |
|
Kwalità u test |
Test tal-ebusija, Test tal-liwi, Idrostatiku eċċ. |
|
Applikazzjoni |
Industrijali, Aerospazjali, Petrokimiku, Mediku eċċ. |
|
Karatteristika |
Saħħa għolja, Reżistenza għall-korrużjoni, Prestazzjoni għolja |
|
Teknika |
Hot rolled, Cold Rolled |
|
Wiċċ |
Bright, illustrat, Pickling, Sandblasting |
|
Servizz ta' Ipproċessar |
Liwi, Iwweldjar, Decoiling, Qtugħ, Punching |
|
Pakkett |
Kaxxa tal-injam |
|
Isem tal-Prodott
|
Illustrat 1mm 1.5mm 2mm 3mm Nitinol Memorja tal-Forma Wajer dritta Nikil Wajer tat-titanju għal Mediku
|
|
Tip ta' Materjal
|
NiTiCu NiTi, Fe NiTi
|
|
|
Temperatura tal-kamra (0C - 15C)
Temperatura baxxa (Taħt 0C) Temperatura għolja (40C - 120C) |
|
Karatteristika
|
Memorja Superelastika jew Forma
|
|
Standard
|
ASTM F2603-18/12
|
|
Wiċċ
|
Ossidu naturali, imnaddfin/inċiżi, art bla ċentru u mnaddfa mekkanikament-
|
|
Kundizzjoni
|
Kif Kiesaħ-Maħdem, Straight Strain Annealed u Shape Set Ittemprat.
|
|
Ċertifikat
|
Temperaturi Trasformati, Proprjetajiet Tensili, Kompożizzjoni Kimika u Rekwiżiti Speċifiċi tal-Klijent
|
|
Wiċċ
|
Illustrar, picking, aċidu maħsul, ossidu iswed
|
|
|
1. Qasam mediku : b'bijokompatibilità tajba ħafna mal-ġisem tal-bniedem, wajer ta 'nitinol mediku jista' jintuża fil-qasam mediku.
2. Manifattur tan-nuċċalijiet tal-għajnejn : Densità baxxa, toughness għolja, stabbiltà għolja, bijokompatibbiltà mal-ġisem tal-bniedem, titanju tan-nikil
wajer tal-liga qed isir aktar popolari bejn il-manifatturi tan-nuċċalijiet tal-għajnejn. 3. Wajer tas-sajd: wajer ta 'liga tan-nikil tat-titanju issa huwa użat ħafna bħala wajer tas-sajd minħabba s-saħħa għolja tiegħu u l-memorabbiltà u superelastika tajba ħafna. |
